Decorative painting.
On the freshly applied paint, we can form a decorative texture in various ways or apply various types of decorative elements.
Quite often, at the junction of the ceiling and wall colors, a decorative strip of another color is painted. We are using …
For painting smaller surfaces of walls and ceilings, we can use a flat brush with a width of approx 15 cm. The work will take a little longer, than using a bench brush, but in the absence of practice, the paint will be spread more carefully and accurately.
If …
Brush painting
Large surfaces of walls or ceilings are nowadays painted with a roller. The bench brush is still used as well. If we paint with paints, then we should use it primarily for washing walls or priming. The bench brush is a fairly expensive tool. So let's do …
Color cutoff
Painting, is it the ceiling, or walls, we always start with the so-called. color cutoff, that is, painting the extreme places, borderline: corners, around the door trims and door frames, as well as walls near switches and other elements, which could not be removed. A roller or …
Building conditions
Raw ceiling, on which the floor is to be built must be completely dry. In new construction, therefore, a waiting period must at least be observed 6 better 10 weeks.
Of course, floor coverings are laid only after the walls have been plastered over. So that …
Wooden plank floors give the room a particularly pleasant atmosphere. They also have a significant insulating value, they keep the legs warm, they are wear-resistant and easy to care for. Wooden floors are laid over concrete ones, raw ceilings, on a base made of wooden squares. …
When finishing the interior of the attic apartments, insulate the floor above the upper inter-story ceiling and prepare a carpet for laying.. Dry screed elements made of plasterboard or gypsum fiber are ideal for this, which have a layer on the bottom side …
The ceiling of the room was covered with embossed wallpaper. The base coat is made of abrasion-resistant adhesive paint only. It is planned to make the undercoat of a wash-off dispersion paint. The ceiling should keep this texture, like wallpaper. Please list the steps for wallpapering the ceiling and …
Installation of corrugated plates – The even surface determines the tightness of the cover on the longitudinal and transverse overlaps of the panels. The top surface of the formwork or lat should form the plane of the roof slope with right angles at the corners of the slope edges (tj. eaves and gable edge or ridge …
Please list the methods of fixing thermal insulation boards with full thermal protection of the building
Thermal insulation boards can:
1) fasten on the floor (pegs);
2) stick on dispersion glue with the addition of cement and additionally fasten with dowels;
3) screw to mounting metal profiles.…